9
Arm Linkage (16).
b. Following the drawing
’s line to attach the front of the
Pivoting Arm Linkage (16)
to the
Right Pivoting Arm (15A)
and
the rear of the
Pivoting Arm Linkage (16)
to the
Crank Cover
by each secure with 1pcs
Bolt, Hex Head
(M10×p1.5×70mm)(145)
, 1pcs
Nylon Nut (M10xp1.5)(154)
.
NOTE: Please
“
fully tighten
”
until the inner surfaces
of the U-Shaped Bracket touch to the outer surfaces of the Bearing Housing to avoid noise.
c. Attach the
Front Linkage Cover
– Top (71)
and
Front Linkage Cover
– Bottom (72)
to the front of the
Pivoting Arm
Linkage (16)
and secure with 4pcs
Bolts, Round Head (M5xp0.8x15mm)(125)
.
d. Attach the
Rear Rotation Cover
– Top (73)
and
Rear Rotation Cover
– Bottom (74)
to the rear of the
Pivoting Arm
Linkage (16)
and secure with 4pcs
Bolts, Round Head (M5xp0.8x15mm)(125)
.
e. Repeat the above same procedure for the left side.
