COMPATABILITY -CHAIN DAMPERS
The
STFU chain dampers
wrap around and contain the chain on your mountain bike, limiting how far
it can move when riding over rough terrain. This results in a quieter ride as the chain is no longer
slapping against your frame but also increases chain life by preventing it from flexing sideways,
which can cause the chain to wear and flex too much over time, decreasing shifting performance.
1/2
TRAIL | DH10 | DH07 | DH00
Gearing:
The STFU chain dampers are designed to work with 1 X setups only. This means if you
have more than one front chain ring the system will not function as designed. We have
tested using a single larger unit of the TRAIL set with 2X setups (2 front chain rings) and it works
on some bikes. A
t this stage we only offer each system as a set.
Specific Applications:
•1X gearing for trail bikes up to a 52 tooth cassette
- use the TRAIL set
•7 speed DH gearing with cassettes up to 26 teeth
- use the DH-07 set
•10+ speed DH gearing with cassettes up to 32 teeth
- use the DH-10 set
Fit:
The STFU modules attach to the top side of the chainstay. For this reason they are generally
only compatible with bikes that have ‘traditional’ chainstays positioned between the upper
and lower portion of the chain. The modules will generally not work with ‘elevated’ type
chainstays that sit above the chain but some users have been making them work. However, we
take no responsibility if you buy and they do not fit.
•
Single
speed
gearing
or
7 speed
cassettes up to
21
teeth
- use the DH-
0
0 set
