Z001019/0_6_July 2008
Page COOLING SYSTEM - 29
SERVICE MANUAL MARINE ENGINES
05 COOLING SYSTEM
ASSEMBLY:
1
Clean sealing surfaces on thermostat housing and
on sealing surface of cover.
2
Put seal (ill.6/pos.1) onto thermostat.
4
Insert thermostat into housing, ventilation mark (ill.7/
pos.1) showing upwards.
ATTENTION:
Put on new seal.
5
Insert spacer.
6
Remaing assembly is done in reverse order.
7
Tighten screws of thermostat housing cover with a
torque of
10 Nm +/-1
.
8
Filling of closed cooling circuit,
refer to 05.00.08
03.02 ill.7
.
03.02 ill.5
03.02 ill.6
1
1
03.02 ill.8
ToC
