Luxus A Electriscreen: Owner’s Manual
7
Installing the high voltage switch control (standard)
A standard 3-position wall switch is supplied. The high-voltage control is
connected to the electrical source. It alternates directions of screen motion
by means of the hot lead, using the 3-position switch.
Preparing the connection
Before making the electrical connections, you need:
An available AC constant power source
A 4-conductor romex or motor connector cable
Making the connections
The diagram in Figure 6 illustrates the connections.
1. Connect the wall switch to the AC constant power source.
2. Connect the wall switch to the screen unit’s electrical box. To do
this, you need to remove the end plate and connect your
connector cable.
Figure 6:
High voltage control wiring diagram
AC Power
Source
Screen Switch
DOWN-Black
UP-Red
Line (Hot)
COMMON-White Neutral
GROUND-Green
Warning!
Do not connect multiple high voltage control switches to one
screen motor. For custom switching applications, contact the
factory.
