Unpacking
1. DO NOT remove the paper hanging from the trapdoor at this
time. You should remove it only after the unit is hung, all electrical
connections have been made, and the screen is in operation.
2. Remove the batten lock-down screws located on the back side of
the case.
4
Stewart Filmscreen Corporation
Warning!
Failure to remove the batten lock-down screws can result in
permanent damage to the screen.
Factory Advisory
The factory advises against installing a concealed or
recessed electrical projection screen permanently. You
must be able to access and remove the unit should future
service be necessary.
Suggested solutions for removing the unit include:
K
A removable ceiling cover plate under the mounting
location.
K
Access to the unit through an attic or overhead space.
