Stewart Audio LuminEsse, Owner'S Manual

Page: 6 / 16

6 Stewart Filmscreen
EZ MOUNT BRACKET SYSTEM
Professional mounting techniques should be used. Stewart Filmscreen cannot be liable for
substandard or faulty installations.
i
BE CAREFUL NOT TO TOUCH OR SCRATCH THE VIEWING SURFACE!
1 Identify the location of wall studs where you can securely mount the hanging bar
2 Use a level to accurately position the hanging bar on the wall
3 Drill holes through the bar into the studs
4 Use the provided 2” screws or other appropriate fasteners to secure the hanging bar to the wall
studs
Note: A minimum of three (3) screws are recommended to safely secure the frame.
5 Check to make sure the bar is level
6 Hang the screen on the hanging bar to ensure that it is correctly mounted
7 Mark on the wall where you will mount the steel pucks to studs that will align with the magnets fas-
tened on the frame
Notes: Find studs that allow the pucks and magnets to be positioned approximately 12” to 24”
from the edge of the frame on each side. If the wall is not perfectly flat, the force of the magnet
may cause the frame to bend. For this reason, shims can be used to place between the wall and
the steel pucks so that the frame lays completely flat.
8 Remove the frame Drill into the studs and mount the steel pucks with the provided 2-3/8” screws
or other appropriate fasteners Use shims as needed
9 Reposition the frame, slide and secure the magnets so they align with the steel pucks mounted on
the wall
10 Your LuminEsse is now ready to hang in its final position See figures 1-3 on page 7