Stewart Audio Gemini, Owner'S Manual

Page: 4 / 18

4 Stewart Filmscreen
TO THE OWNER
Congratulations on purchasing the finest optical viewing screen available anywhere in the world!
Your hand crafted screen has been carefully inspected, and tested to fully ensure your optimal viewing
experience will last for many years Please, take a moment to review this manual; it will guide you through
the installation, and operation of your screen It will also provide you with detailed instructions on how to
care for your new Stewart Filmscreen Gemini projection screen
From all of us here at Stewart Filmscreen, we’d like to thank you for choosing Stewart Should you have
any issues please don’t hesitate to contact our customer service department We’re here to help
Mary Stewart | Owner and CEO
ABOUT GEMINI
The Stewart Filmscreen Gemini is a custom projection screen product It contains 2 indivdual screens in
one housing One important cautionary note about this product is that it is not advisable to deploy both
screens at the same time This screen operation method will protect the back screen from receiving
strike marks from the front screen in the event of the front screen colliding into or contacting the back
screen We strongly urge that you adhere to this advisement to preserve the optical integrity of the back
screen The onboard control system contains the Stewart Dual IMC set It provides the ability to connect
to any type of switching apparatus to control the screens
IMPORTANT SAFETY INFORMATION
Carefully read all instructions This screen must be installed by a qualified electrician For supply
connections, use wires rated for at least 75 C Use copper or aluminum conductors For indoor use only
Do not connect low-voltage to line-voltage power
Check with your local electrical inspector for compliance with local / national codes and wiring practices
Earth / ground terminal connection must be made as shown in wiring diagrams Proper short-circuit
and overload protection must be provided at the circuit breaker distribution panel You can use a 20A
maximum circuit breaker which is typically found in most residential and commercial sites