Stewart Audio Gemini, Owner'S Manual

Page: 13 / 18

Gemini 13
CARING FOR AND CLEANING THE SCREEN
With reasonable care, you may expect many years of dependable use of your Stewart projection screen
GENERAL MAINTENANCE
The surface of your screen is delicate, so we encourage you to keep your screen clean Special attention
to these instructions should be followed when cleaning
`
`
Avoid getting any foreign objects on the screen, as cleaning may prove very difficult It may not be
possible to remove scratches, paint, ink, etc
`
`
A draftsman-style brush may be used to lightly whisk away any loose dirt or dust particles (This type of
brush is usually available at office supply stores ) Stewart Filmscreen has an optional screen cleaning kit
that contains the proper type of brush Contact your dealer if you would like to obtain this cleaning kit
`
`
For tougher spots, you can make a cleaning solution using a water-based detergent and warm water To
make the solution, mix one part Simple Green, 409, or other water based industrial cleaner with three
parts warm water Moisten a clean cotton cloth or Q-Tip with this solution, lightly moisten the stained
area, and gently lift off the stain Never use an aggressive scrubbing action as you could damage the
screen surface by removing the optical coating Remoisten the area with clean water and dab dry with
a clean sponge or cotton cloth Any residual watermarks will evaporate on their own in a few minutes
`
`
Contact the factory if you have questions about removing difficult spots
i
CAUTION
`
`
Do not use any other cleaning materials on the screen
`
`
Do not use chemicals or solvents to clean the screen Use only commercially available, water-
based de-greaser
`
`
Do not use chemicals, solvents, or liquid cleaners to clean the VeLux covering
`
`
Do not fold or crease the screen
REPLACEMENT PARTS & SERVICE
No user-serviceable parts are contained within the unit Contact your dealer or the factory if you require
part replacement or service