background image

CVA50PMX-1 

Owner’s Manual 

August 2013 

www.stewartaudio.com 

CVA50MX-1 

Important Safety Instructions 

 
Before using your Stewart Audio Inc. Power Amplifier, please read this 

Owner’s Manual 

carefully to ensure optimum trouble-free perfor-

mance. 
 

WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EX-

POSE THIS AMPLIFIER TO RAIN OR MOISTURE. DANGEROUS HIGH 

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE 

CABINET. REFER  SERVICING TO QUALIFIED PERSONNEL ONLY.

    

 
 
 
 
 
 
 
 
 
 

 

The lighting bolt within arrowhead symbol, within an 
equilateral triangle, is intended to alert the user to the 
presence of un-insulated “dangerous voltage” within 
the product’s enclosure that may be of sufficient mag-
nitude to constitute a risk of electrical shock to person. 
 
The exclamation point within an equilateral triangle, is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instruction in the 
literature accompanying the appliance. 
 
 

Important Safety Instruction – Please Read Prior to Product  
Installation. 

 

1.  Installation should be performed by a trained and licensed professional to 

insure safe and lasting operation. 

 
2.  All of the safety and operating instructions should be read before the am-

plifier is installed or operated. Retain these instructions for future refer-
ence. All instructions should be followed; all warnings on the amplifier 
and in the operating instructions should be adhered to.   

 

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO 

QUALIFIED SERVICE PERSONNEL.

Summary of Contents for CVA50MX-1















Reviews: