background image

1 Welcome 

 
Congratulations on the purchase of your new Stewart Audio CVA50MX-
1 / CVA50PMX-1power amplifier. This amplifier has been designed and 
built to provide you with years of high-quality audio performance and 
trouble-free operation. If after reading this manual you should have any 
questions concerning amplifier installation and operation, please con-
tact your Authorized Stewart Dealer, or you may contact us directly 
using the contact information provided on the back of this manual. 
 

1.1 Features 

Your Stewart Audio CVA50MX-1 / CVA50PMX-1 amplifier is the result 
of years of experience in the design and manufacture of quality amplifi-
ers. As such it provides a combination of performance and operational 
benefits that simply cannot be found in conventional amplifiers.  
 



Sub Compact 1/3 rack package 

 



4 input mono mixer amplifier 

      

 



Music and fire alarm muting 

 



Clean full–range dynamic power 

 



Signal Sense Technology for Energy Star Compliance 

 



Multiple mounting options 

 



External inline power supply 

 



Made in the USA 

 

 

1.2 Using this Manual 

In order to obtain maximum performance from your CVA50MX-1 / 
CVA50PMX-1 Amplifier, please take time to read this brief owner’s 
manual and carefully follow the guidelines for connection and opera-
tion.  
 
This manual provides you with the information necessary to safely in-
stall and operate your new CVA50MX-1 / CVA50PMX-1 amplifier in the 
most common scenarios. If you find yourself requiring additional assis-
tance, please feel free to contact your Authorized Dealer, or you may 
contact us directly using the information provided on the back of this 
manual.

 

2 Setup 

 

2.1  Setup Precautions 

 

CAUTION: Before installing your amplifier, make sure that 
you have read the Important Safety Precautions at the be-
ginning of this manual. 

 

 

2.2 Amplifier Installation

 

 
 

The CVA50MX-1 / CVA50PMX-1 incorporates a number of different 
mounting options in order to fit your installation needs.  
 

2.2.1 Pole-Mounting

 

 

The CVA50MX-1 / CVA50PMX-1 has mount holes on both the top as 
well as the side of the unit which can be used with the AV-Pole bracket 
available from Stewart Audio.  

 
 

 
 

 

 

Part Number: AV-Pole 

CV

A50MX

-1

M

ic/I

nput 1

Input 2

Input 3

Input 4

Duck

ing S

ensitivit

y

Duck

ing

Sig

Clip

Pwr

Summary of Contents for CVA50MX-1















Reviews: