Stewart Audio AV25-2 NET Series Owner'S Manual Download Page 4 | Manualshive

Page: 4 / 13

background image

2 Setup

2.1 Setup Precautions

CAUTION: Before installing your amplifier, make sure that
you have read the Important Safety Precautions at the be-
ginning of this manual.

2.2 Amplifier Installation

The AV25-2 NET series incorporates a number of different mounting
options in order to fit your installation needs.

2.2.1 Pole-Mounting

The AV Series of amplifiers is Stewart Audio’s first line of pole-
mountable amplifiers. The AV25-2 NET series has mounting holes on
the top of the unit which can be used with the AV-Pole bracket availa-
ble from Stewart Audio.

Part Number: AV-Pole

2.2.1 Universal-Mount Installation

The AV25-2 NET series also has a universal bracket available which al-
lows the unit to be mounted against a wall or under a table. Two
screws are included in the kit which will affix the bracket to the top or
the side of the unit. Once this is done, two holes are available for
mounting the unit where desired.

CAUTION: Use only the screws provided in mounting
brackets to the amplifier. Do not over tighten.

Part Number: AV-Bracket

A

V25-2 NET+

6

7

«
...
2
3
4
5
6
...
»

Summary of Contents for AV25-2 NET Series














Reviews:

No comments

Related manuals for AV25-2 NET Series

Brand: XINDAK Pages: 11

Brand: Teac Pages: 15

Brand: Broadcast Tools Pages: 5

Brand: Laney Pages: 4

Brand: Marshall Amplification Pages: 12

Brand: Evolveo Pages: 11

IronHorse DH40H

Brand: Traynor Pages: 9

Brand: Harman Kardon Pages: 11

Ininity INFDSP4425

Brand: Harman Pages: 34

Brand: Takstar Pages: 2

Brand: Merit Pages: 22

Brand: Crunch Pages: 2

Brand: AAS Pages: 8

Brand: ATEN Pages: 2

Brand: AVProConnect Pages: 16

Audio Buddy Dual Mic Preamp

Brand: M-Audio Pages: 8

Brand: Toa Pages: 12

Brand: AR Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands