TIGER Chipper Shredder CS7-205V & CS7-305V Owners Manual (P/N 1432)
page 3
Congratulations on the purchase of your TIGER Chipper Shredder Model CS7
-
205V or CS7
-
305V
The TIGER Chipper Shredder is proudly NZ made, designed to c
hip and shred your garden waste into fine
mulch to use back in your garden as rich compost. Improve the health of your soil and plants; retain
moisture and reduce weeds. Turn fallen tree or palm branches, pruning’s, bark and leaves, hay into
garden mulch.
This document contains information on how to safely operate your new machine, and is based on
information available at the time of publication. Stevens Group continually research, develop and
improve their equipment. In doing so, we reserve the right to add improvements or make changes to our
product without notice, without obligation for equipment previously sold.
Please send us your Warranty Form
The Warranty form is included at the back of this Owners Manual. Please take the time to fill in the information,
and send us your completed form. We can then register your machine and commence coverage under the Limited
Warranty.
Serial Number
Your machine has a Serial Number located on the left side of the machine, behind the lever. Record this number
and the Engine Serial number below.
Machine Serial Number: ________________________________________________________________
Engine Serial Number: __________________________________________________________________
The Vanguard Engine Warranty applies to new purchased Vanguard product identified by the Engine Serial Number.
Save your proof of purchase receipt. If you do not provide proof of the initial purchase date at the time warranty
service is requested, the manufacturing date of the product will be used to determine the warranty period. Product
registration is not required to obtain warranty service on Briggs & Stratton products.
Fuelling your engine
Before starting check the engine oil and petrol levels.
Use a good quality engine oil (either SAE 10W30 or SAE 10W40) and 91 Unleaded Petrol.
The Vanguard 6.5HP requires approximately 0.6 Litre of oil to fill the engine.
The Vanguard 10HP requires approximately 0.8 Litre of oil to fill the engine.
Please refer to engine manuals for more details:
-
https://www.vanguardengines.com/na/en_us/support/manuals.html
Tyre Pressure
The maximum recommended tyre pressure is 25 PSI. Over inflation may cause serious damage.
Engine Servicing
For servicing of the engine, please refer to the engine manual.
Before you Begin
Contacting Stevens GROUP
Address
Phone
293 Landing Drive
Mangere, Auckland, New Zealand
+64 9 275 0443
