Page
|
6
3.0 Cell-Net-Set Software
Cell-Net can be configured with Cell-Net-Set software. Cell-Net-Set Software can be loaded
from the CD that accompanied the shipment of this product.
3.1 Cell-Net Setup
Once Cell-Net-Set Software is installed on the computer, and the Cell-Net modem is properly
powered with a 12 volt DC source, connect a USB cable between the modem and the computer
.
3.2 Connecting to the modem
When the software is first opened, the “Go Online/Go Offline” Button (see section 4) will say that
it is not connected near the top. In the summery tab, click the down arrow in the connection box.
If the modem is connected through the USB, the MEID or IMEI of the connected modem will
appear. In this example, the IMEI number is 354660047225845, but will be different for every
modem.
Note:
The Connection field will be “greyed out” until USB enumeration has taken place. After
which, the pull-down menu will be available.
This can take up to 1 minute after power up
.
