Fuselage Construction
Create faux glow engine by stacking disks A
through J on a scrap piece of .025 wire.
Paint cylinder black and glue to front of F7
with medium CA.
Glue pilot cut-outs to balsa figure part P with
contact cement.
Fit and glue pilot to part F3.
Wing Construction
Fit and glue parts W1a and W1b together.
Fit and glue rib R2 to slot in leading edge of
wing.
LiddleRod™ © 2010 Stevens AeroModel all rights reserved.
Page 11 of 14
