st
eut
e Schaltgerät
e GmbH & Co. K
G
Brück
ens
tr
aße 91, 32584 Löhne, Germany, www
.s
teut
e.c
om
//
SW 100 AMB INT / SW 100 AMB EXT
Instruction for use
Instructions d'utilisation
Labelling:
steute module label:
FCC Regulatory information. OEM device should contain labelling that:
Approved in accordance to FCC rules; transmitter module marked by
FCC-ID »XK5-« label; manufactured by steute incorporated to OEM
product. When it is not possible, user manual should include such in-
formation.
For example:
»
This device complies with Part 15 of the FCC Rules and with RSS-210
of Industry Canada. Operation is subject to the following two condi-
tions: (1) this device may not cause harmful interference, (2) this de-
vice must accept any interference received, including interference that
may cause undesired operation.
«
This device contains: FCC-ID XK5-
SW 100 AMB INT / SW 100 AMB EXT.
This label will be placed on the final product, clearly visible to all per-
sons exposed to the transmitter. The specific location on the final
product will be consistent with each same final product, but will vary in
location across various final products, and in any case will always be
clearly visible to all persons exposed to the transmitter. The physical
size of the label and font size of the lettering will be dependent on the
size of the final product, but in any case will always be clearly visible to
all persons exposed to the transmitter.
Japanese Radio Law Compliance
This device is granted pursuant to the Japanese Radio Law. This device
should not be modified (otherwise the granted designation number
will become invalid).
Antenna implementation notes
.
Use of an antenna or cable of a different type than the tested antenna
or one that exceeds the gain of a tested antenna would require retest-
ing and new approval by either a Telecommunication Certification Body
or the Commission. Manufacturers OEM would be expected to supply a
list of acceptable antenna types with applications for equipment au-
thorization. The antenna is connected over a coaxial cable with a nomi-
nal attenuation of 3,8dB/m. It is a ready to use cable (purchased part
from steute) with at least 6 cm length.
The external antenna is described as follows:
Model Name:
17010.11 REV
Manufacturer:
WiMo
Max Gain:
2.0 dBi
or:
Model Name:
1300806V
Manufacturer:
steute
Max Gain:
2.2 dBi
The internal antenna is described as follows:
Model Name:
2450 AT 42B100
Manufacturer:
Johanson Technology
Max Gain:
-1.5 dBi
The wireless module can be incorporated into many different devices.
The modules generally consist of a completely self-contained radiofre-
quency transmitter missing only an input and a power source to make
it functional. Once the modules are authorized by the Commission
under our certification procedure, they may be incorporated into a
number of host devices such as, PCs or PDAs, which have been sepa-
rately authorized. The completed product generally is not subject to
requirements for further certification by the FCC.
Other regulatory notes for OEM
Modular transmitters save manufacturers the time and any related ex-
penses that would be incurred if a new equipment authorization were
needed for the same transmitter when it is installed in a new device.
This means that it can be integrated into end products without further
testing or approval listing. The manufacturer must state the steute
part number and product reference in his literature in order to meet
the requirements of the regulatory. This should be clearly indicated in
the OEM manuals. The purchaser/integrator (developer) must satisfy
all relevant FCC, SAR, EMC and Radio regulations which apply to their
finished product. We believe such parties have the technical compe-
tence to ensure that the systems they deploy continue to comply with
all those rules.
A separate approval
A separate approval of the device into which the module is incorporat-
ed is only required when it cannot be insured that the conditions on the
module grant will be met. The purchaser must satisfy all relevant FCC,
EMC and Radio regulations R&TTE directive which apply to their fin-
ished product.
English
