28
Troubleshooting
PRODUCT DOES NOT TURN ON:
▪ Check that the cables are connected correctly. Make sure that all
connections have electrical and mechanical contact.
▪ Fuses or circuit breakers may be defective or blown. Check the
condition of the circuit breakers and whether it is compatible with the
consumption of the equipment.
▪ Check that the battery charge is sufficient for operation.
▪
No signal from the
REMOTE IN
input. Check that the remote
connection is receiving voltage close to
12V
.
ICON INDICATING CONSTANT LOADING:
▪ Possible connection problem with the processor. Redo the connection
via the connection icon
(top right icon).
BLUETOOTH NOT VISIBLE / CANNOT PAIR:
▪ Close the application, turn Bluetooth off and on the device and open
the application again.
▪ Turn the processor off and on.
NO SOUND:
▪ Check that the GAIN and LEVEL controls of the inputs and outputs.
▪ Check that the outputs are not off/mute.
▪ The speaker cables or RCA plugs may not be connected correctly or
may be defective.
NOISES AND GLITCHES IN THE SOUND:
▪ Check that the installation is not close to the vehicle’s original wiring,
they can cause interference and noise in the audio signal.
▪ Make a separate power connection for the sound system. Use a fuse/
circuit breaker as close as possible to the battery for protection.
Do a good grounding of the amplifier. For this remove the paint from
the vehicle chassis at the desired point. Screw on the wire using a
ground terminal. To protect it from oxidation, insulate it with paint.
Do not make a ground loop using several grounds. Prefer the star
connection, with all grounds starting from a single point.
