STERWINS ESH2-45.41, Assembly, Use, Maintenance Manual

Page: 251 / 266

- Do not overreach. Keep the balance at all times, to always be sure of
the footing on slopes. Walk, never run.
- Do not connect a damaged cord to the supply or touch a damaged cord
before it is disconnected from the supply for the reason that damaged
cords can lead to contact with live parts.
- Keep extension cords away from moving hazardous parts to avoid
damages to the cords which can lead to contact with live parts.
ADVICE
Warning!
Do not touch moving hazardous parts before the machine is
disconnected from the mains and the moving hazardous parts have
come to a complete stop.
- Never operate the machine with defective guards or shields, or
without safety devices, or if the cord is damaged or worn.
Avoid using the machine in bad weather conditions especially when
there is a risk of lightning.
RECOMMENDATIONS
MAINTENANCE
Before and after each use, check the product and accessories (or
attachments) for wear and damage. If required, exchange them for new
ones as described in this instruction manual. Observe the technical
requirements.
Be aware of the danger of moving hazardous parts.
Never use caustic agents to clean plastic parts.
Never disassemble the tool or carry out any repairs. Always have the
2. SAFETY INSTRUCTIONS
251
FR
ES
PT
IT
EL
PL
RU
UA
RO
EN