STERWINS ESH2-45.41, Assembly, Use, Maintenance Manual

Page: 247 / 266

a) When the machine is stopped for servicing, inspection, or storage,
or to change an accessory, shut off the power source, disconnect the
machine from the supply and make sure that all moving parts are
come to a complete stop. Allow the machine to cool before making
any inspections, adjustments, etc. Maintain the machine with care and
keep it clean.
b) Store the machine in a dry place out of the reach of children.
c) Always allow the machine to cool before storing.
d) When servicing the shredding means be aware that, even though the
power source is switched off due to the interlock feature of the guard,
the shredding means can still be moved.
e) Replace worn or damaged parts for safety. Use only genuine
replacement parts and accessorises.
f) Never attempt to override the interlocked feature of the guard.
Additional safety instructions for units with bagging attachments
Switch-off the machine before attaching or removing the bag.
The machine should be supplied via a residual current device (RCD) with
a tripping current of not more than 30 mA.
2. SAFETY INSTRUCTIONS
RECOMMENDATION
MAINTENANCE AND STORAGE
247
FR
ES
PT
IT
EL
PL
RU
UA
RO
EN