background image

7

RU

KZ

EN

Type and source of the danger: This symbol indicates that damage to the appliance, the 

environment or other property may occur as a result of non-observance of this warning.

Note : This symbol indicates important information for better understanding of the product.

 

Read the manual: This symbol indicates that you need to read the user manual carefully.

 

X.XX

Please refer to the corresponding illustration at the end of the booklet. 

®

Green point : Packaging recycling.

This product is recyclable. If it cannot be used anymore, please take it to waste recycling 

center.

Recycling code of paper.

2.4 WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of 

flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or 

fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause 

you to lose control.

2.5 ELECTRICAL SAFETY

WARNING ! This product produces an electromagnetic field 

during operation! This field may under some circumstances 

interfere with active or passive medical implants! To 

reduce the risk of serious or fatal injury, we recommend 

persons with medical implants to consult their doctor and 

the medical implant manufacturer before operating this 

product !

Summary of Contents for 3276007088533












































Reviews: