STERWINS 3276000660170, Assemby - Use - Maintenance Manual

Page: 343 / 365

343
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN
- Maintain this product in accordance with these instructions and keep it well lubricated
(where appropriate).
- Plan your work schedule to spread any high vibration tool use across a longer period of time.
To reduce this risk when using the product, always wear protective gloves and keep your hands warm.
After use
Switch the product off and make sure that all moving parts have come to a complete stop. Attach the
blade sheath. Remove the battery pack and let it cool down. Check, clean and store the product as
described below.
Removing and charging the battery : Illustration 5.2 and battery instruction manual
1. Press the lock button on the top center of the battery to slide it out of the product.
2. Place the battery pack into the charger by sliding it into a locked position until it clicks
3. When the green light is flashing, the battery is charging. If the green light is no longer flashing, the
battery is fully charged.
5. TRANSPORTATION
Transporting the machine or battery may require that you meet certain requirements specific to your
country. Please make sure to respect them by contacting the authorities of your country, in order to
respect them all. Ensure temperature during transportation will never be out of temperature range given
on chapter storage
5.1 TRANSPORT THE MACHINE
Switch the product off, make sure that all moving parts have come to a complete stop and remove the
battery pack. Always carry the product by its handle with the blade sheath attached. Protect the product
from any heavy impact or strong vibrations which may occur during transportation in vehicles. Secure
the product to prevent it from slipping or falling over. Do not expose the product to sunlight.
5.2 TRANSPORT THE LITHIUM BATTERIES
Please refer to the battery instruction manual for further details.
6. WINTERING
Illustration 6.1 to 6.3
Plug out the battery from the power tool.
Before long storage please ensure the battery charge fit to instructions provided on battery instruction
manual.
Follow all instructions given on chapter storage below. We recommend using the original
package for storage or covering the product with a suitable cloth or enclosure to protect it against dust.
7. STORAGE
Only store the machine and the battery in a clean, dry, ventilated place with a temperature range of 4°C
to 24°C. Cover it in order to provide added protection. We recommend using the original package for
storage or covering the product with a suitable cloth or enclosure to protect it against dust. Be sure to
secure the unit while transporting
7.1 STORE THE MACHINE
Illustration 6.3
Plug out the battery from the power tool. Examine the unit thoroughly for worn, loose or damaged parts.
Clean the unit before storing. Do not expose the product to sunlight. Make sure the product is always
protected from cold and humidity.