STERWINS 17882151 Assemby - Use - Maintenance Manual Download Page 193

Page: 193 / 218

193

194

•

The pump must be installed in compliance with applicable

national regulations of each country.
• Check with a specialist for further detailed information.
• Before installation, adjustments, maintenance, or storage,

unplug the electric cable from the power outlet.
• Do not expose the electric plug to humidity.
• Some regions have regulations that restrict the use of the

product in some operations. Check with your local authority for

advice.
• Local regulations may restrict the age of the operator.
• Keep in mind that the operator or user is responsible for

accidents or hazards occurring to other people or their property.
• Disconnect the plug from the power source from the product

before making any adjustments, changing accessories, or storing

it. Such preventive safety measures reduce the risk of starting

the product accidentally.
• Maintain the product. Check for misalignment or binding of

moving parts, breakage of parts and any other condition that

may affect the operation. If damaged, have the product repaired

before use.
• While operating the product, always wear substantial footwear

and long trousers. Do not operate the machine when barefoot

or when wearing open sandals. Avoid wearing clothing that is

loose fitting or that has hanging cords or ties; they can be caught

in moving parts.

The pump must not be used while any person is in the water.

• Check the fault current protection switch and the protective

earth contact (earthing) for proper function at regular intervals
• Check the power cord with mains plug for damage before every

use. If the power cord is damaged, please arrange immediately

for the exchange by an authorized customer service or a skilled

electrician.
• All electrical sockets should be fixed in an area that is protected

against floods.
• Do not use the power cord to carry/ transport the machine.
• Do not scrape the power cord across sharp edges and ensure

that it does not get pressed.
• The voltage indicated on the type plate must correspond to the

voltage of the electrical source
• Always plug the power cable to an earthed 220V-240V 50Hz

power supply protected by a minimum 10-amp fuse.
• Pollution of the liquid could occur due to leakage of lubricants
• If the product is already assembled, please make sure that all

screws are tightly fixed before using it. If the product requires

that you assemble it, please make sure upon opening the

package that all the elements needed for setting up the product

have been provided. If the product is damaged or has defects, do

not use it and take it back to the nearest store.

2.2 SYMBOLS ON THE PRODUCT

Complies with European standards: This symbol means that this appliance is compliant with

the applicable European directives, and a test of compliance with these directives has been

performed.

Single mark of circulation of products on the market of the Member States of the Customs

Union.

Ukrainian conformity marking