stertil SP 2522, Operation Manual

Page: 52 / 176

Operation Manual (Version: B) 8 Type SP
Bold text is used for (sub)titles or for information that needs special attention:
“Read these instructions carefully”.
1.9 Who is this manual intended for?
This manual is intended for operators of the dock leveller type SP. All operators of
the dock leveller must fully read the following chapters and follow the instructions
exactly.
After you have read the manual of the dock leveller you can use this manual for
reference. Use the table of contents and the index to locate specific information in
this manual.
This manual is a guide for operating the machine. Each operator action is
described in the relevant sections of this manual.
For routine operation of the machine, the operator must:
•
have enough technical knowledge and experience to carry out the assigned
tasks,
•
be able to recognize and prevent hazards,
•
have read this manual and must understand the contents,
•
have been adequately trained,
•
be able to follow the procedures in this manual.
1.10 Related documents machine
This manual is part of the documentation set for the machine. This set consists of
the following documents:
•
Operator Manual (included with machine),
This manual contains all required information for the operation of the machine.
This manual details also operator related maintenance.
•
Installation and Service manual (available on request),
This manual describes the procedures required for a proper installation and
preventive and corrective maintenance, that must be carried out by a certified
service engineer. This manual contains all the relevant system engineering
drawings as well as the lists of spare parts of the machine.
1.11 Version history
Every effort has been made to make this manual as accurate and complete as
possible. However, should the user(s) find any errors or omissions, it would be
appreciated if these were brought to the attention of Stertil. Please report any
errors or omissions to Stertil.
Also, during the lifetime of the machine, engineering improvements may result in
the need to revise this manual. It is then at the discretion of Stertil, if a
revision/new version of this manual is required.