14 45 00-1
DIVISION 14 45 00
VEHICLE LIFTS(ST 1085 FWA ebright)
PART 1 GENERAL
1.1
SECTION INCLUDES
A.
Mobile column lifts.
1.2
RELATED SECTIONS
A.
Section 03 30 00 - Concrete: Footings and foundations.
B.
Section 26 05 00 - Common Work Results for Electrical.
1.3
SUBMITTALS
A.
Submit under provisions of Section 01 30 00 - Administrative Requirements.
B.
Product Data: Manufacturer's data sheets on each product to be used, including:
1.
Preparation instructions and recommendations.
2.
Storage/handling requirements and recommendations.
3.
Installation methods.
C.
Shop Drawings: Submit drawings showing full layout of all lifts with dimensions
D.
Operation and Maintenance Manual: Submit Operation and Maintenance manual to
include system operation, maintenance and troubleshooting, spare part numbers,
drawings and schematics.
1.4
QUALITY ASSURANCE
A.
Manufacturer Qualifications: The lift company selling the product shall have
ISO-9001 certification and the proof of current certification shall accompany the bid.
B.
Installer Qualifications: For warranty validation, installation shall be performed by
qualified factory authorized and trained personnel.
C.
Product Requirements:
1.
Design Standards and Certification: The lift shall be certified by ETL/Intertek
to the ANSI/ALI ALCTV-current edition Standard for Automotive Lifts: Safety
Requirements for Construction, Testing and Validation.
2.
The drive system shall permit lifting without any pulsation, jerks, or unsteady
lifting. Lifting shall be smooth. System shall be comprised of an electrically
powered pump, flow control valves, and a fluid reservoir. An
electronic/hydraulic synchronization system shall ensure smooth alignment of
each lifting assembly based on variances in vehicle weight. A microprocessor
shall control all lift movement for ultimate operator safety and convenience.
Troubleshooting codes shall facilitate service and repair.
