background image

SETUP AND MOVING 

7

THE BEATLES MANUAL 500-55K8-01

© 2018 Apple Corps Ltd. All rights reserved. 

A Beatles™ product lecensed by Apple Corps Ltd. 

“Beatles” is a trademark of Apple Corps Ltd. “Apple” and the 

Apple logo are exclusively licensed by Apple Corps Ltd.

1. SECURE THE BACKBOX

1.  Ensure that the pinballs are re-

moved from the playfield, and se-
cure any free-moving mechanisms 
that may get damaged in transport

2.  Remove the backbox securing 

bolts

3.  Carefully lower the backbox onto 

the side rails. Use a piece of card-
board or suitable padding between 
the backbox and the game. 

4.  Securely strap the back box to the 

game

5.  The game may be transported with 

the legs on.  If the legs must be re-
moved, follow the remaining steps. 

2. REMOVE THE LEGS AND 

STAND UP

1.3  TRANSPORTING THE GAME

2

3

4

6.  Remove the legs, rear legs first. Use 

a stool or a friend to support the 
rear of the game.

7.  Rest the rear of the game on the 

ground.  

6

CAUTION

NEVER  TRANSPORT  THE  GAME 

IN  A  MOVING  VEHICLE  WITH  THE 

BACKBOX  RAISED!  TWO  PEOPLE 

ARE  REQUIRED  TO  REMOVE  THE 

LEGS!

10.  Secure all loose parts and trans-

port with a hand truck in the 
upright position.

8.  Stand the game up on its back. 

8

9.  Remove the front two legs.

9

When transporting the game, such as in the back of a truck or with a hand truck, the 
game’s backbox must be secured to prevent damage to the side rails. 

TOOLS REQUIRED

•  STRAP (500LB OR GREATER)

•  AN ASSISTANT

•  HAND TRUCK

Summary of Contents for The Beatles






Reviews: