6
FAUCET INSTALLATION
Step 3 – Connecting the water supply
1. a. Connect the flexible pipe to the
water supply.
b. For models with temperature control
connect the red flexible pipe to the hot
water supply and the blue flexible pipe
to the cold water supply.
2. Make sure that the filter(s) is/are
installed between the flexible pipe and the
shut off valve (angle valve) (not supplied).
3. Turn on the central water supply and
the shut-off valves (angle valves).
4. Check for leaks.
Step 4 - Connecting the power source
1. Plug the transformer into the electricity socket and
connect the connectors.
Warning:
Do not place the transformer or transformer box
close to other cables related to the building infrastructure.
2. Wait a few seconds before activating the faucet.
3. If the range is unsatisfactory, refer to the section titled
“Range adjustment”.
Note:
This faucet includes a special aerator that allows you to
adjust the water stream direction on site in order to prevent water
splashing if needed. To change the angle of the water stream,
simply move the adjustable tilting plate by pressing it smoothly.