10
MAINTENANCE
Care and cleaning of chrome and special finishes
DO NOT use steel wool or cleansing agents containing alcohol, acid, abrasives, or their
like .Use of any prohibited cleaning or maintenance products or substances could
damage the surface of the soap dispenser. For surface cleaning use ONLY soap and
water, then wipe dry with a clean cloth or towel. When cleaning bathroom tiles, the
soap dispenser should be protected from any splattering of harsh cleansers.
Disassemble of the soap pipe from the pump
The soap pipe can be disconnected from the soap pump by a simple slide & pull action.
The sliding ring of the quick connection fixation nipple on the pump should be pulled
down. It releases the open end of the soap pipe which can then be easily pulled out.
Filter cleaning instructions (foam dispenser only)
This soap dispenser is provided with a foam filter. It is recommended to clean the filter
every six (6) months.
If the soap supply has decreased, this may be caused by the clogged filter. The filter
can be cleaned as follows:
1. Use a wrench to unscrew the quick connection fitting from the foam compressor and
pull out the filter housing.
2. Remove the filter from the housing.
3. Replace the filter (recommended) or wash it under running water for a temporary fix.
4. Reassemble the parts.
