2. Sink Preparation
The sink has been predrilled at the factory, providing several
different faucet combinations. The dot on the top surface indicates
the faucet opening.
CAUTION: Risk of personal injury or product damage.
The
sink is heavy. Get help lifting the sink into place.
Place the sink into the countertop cut-out.
Place a Phillips screwdriver on the orange dot of the desired
faucet opening.
Hit the screwdriver with a hammer, driving the screwdriver point
through the sink material.
Smooth the faucet hole with a file to remove the rough edges and
excess sink material.
Repeat the procedure for each desired faucet opening.
Remove the sink from the cut-out.
3. Install the Faucet
Install the faucet and strainer fittings according to the
manufacturer’s instructions. If you are reusing fittings from an
old sink, use plumbers putty under the faucet base and top flange
of the strainer.
Phillips
Screwdriver
Orange Spot
Desired
Faucet Hole
Opening
1025454-2-B
4
Sterling
Summary of Contents for SC2522SBG
Page 26: ...1025454 2 B...
Page 27: ...1025454 2 B...
