Operating Instructions
Manual Suction Control
Your vacuum cleaner includes a manual variable suction control on the flexible hose
handle. The suction power can be adjusted by moving the suction regulator to the
desired position between Open and Closed. (Fig. 10)
Open gives you less suction, closed maximum suction. For example, less suction is
required on upholstery and draperies compared to thick carpets, which require maxi-
mum suction.
Using the Floor to Carpet Brush
1. To attach the floor to carpet brush to the telescopic tube, insert the telescopic
tube into carpet to floor brush. (Fig. 11)
2. Step on the floor to carpet selector to adjust the height of the brushes. There are
two (2) different heights, one for floors and one for carpets. (Fig. 12)
3. To remove the telescopic tube from the floor to carpet brush, pull the telescopic
tube out from the floor to carpet brush.
Attaching the Telescopic Tube to the Flexible Hose Handle
1. Holding the telescopic tube, insert the handle into the telescopic tube receptacle. Push the handle in. (Fig. 7)
2. Push forward on the plastic button and pull the inner tube outward to extend for a longer reach. (Fig. 8)
3. To remove the telescopic tube from the flexible hose, press on the telescopic tube release button and pull it out. (Fig. 9)
NOTE:
Always remove the power plug from the wall outlet before assembling or removing accessories.
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12