This warranty covers all defects in workmanship or materials for:
The mechanical and electrical parts contained in this product, for a period of 12 months, from the date of purchase. You must keep and be
able to provide your original sales receipt as proof of the date of purchase. This warranty is covered the original retail purchaser of this product.
The manufacturer will repair or replace, in your home, any mechanical or electrical part which proves defective in normal household use for a
period of 12 months.
THIS WARRANTY DOES NOT COVER:
• Damages from improper installation
• Damages from shipping
• Damages from misuse, abuse, accident, alteration, lack of proper care and maintenance
• Damages from service by persons other than an authorized dealer or service center.
• Labor, service, transportation and shipping charges for the removal of defective parts and for installation of a replacement part, beyond the
initial 12-month period.
This warranty does not extend to fluorescent lamp starters and tubes.
THIS LIMITED WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
The remedy provided in this warranty is exclusive and is granted in lieu of all other remedies. This warranty does not cover incidental or
consequential damages. Some states do not allow the exclusion of incidental or consequential damages, so this limitation may not apply to
you. Some states do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights, which vary from state to state.
WARRANTY
SERVICE PARTS
1
4
4
5
d
e
a
2
3
b
c
6
8
7
9
9
10
PART
PART NAME
Qty.
1
2
3
4
5
6
7
8
9
10
11
a
b
c
d
e
Housing
Damper / Duct Connector
Wiring plate
Screw
Blower Wheel
Wire Panel / Harness Assembly
Motor
1
2
1
1
1
1
1
1
4
1
1
4
4
1
4
1
Isolator
Motor Plate
Washer
Nut, Hex Lock
Grille Assembly (includes part 2&11)
Grille Spring
Hanger Bar Kit
Screw
* Blower Assembly includes part 5, 4, d, 3, c, b, a.
Replacement installation:
Remove the screw (part c), then take out the motor plate (part 3) from
the housing (part 8) by pushing down the rib in the plate while pulling
out on the side of the housing. Replace the broken parts.
WARNING:
Ensure that the fan is switched off from the supply mains before replacing.
11
Lens
