3-3
Operating Instructions
Operator / Service Manual
069216
3.2.4 Reverse Trendelenburg
Adjustment
Place the unit at maximum height, see
. Press down on release pedal nearest
the foot end (Figure 3-7) until desired position is obtained, then
remove pressure.
3.3 Fowler Operation
3.3.1 Raising the Fowler
Grasp the fowler frame tube (Figure 3-8A), and lift up on the fowler.
When desired height is reached, lower the fowler slightly until the
ratchet plates are engaged (Figure 3-8B). Be sure the fowler is
locked into place by pushing down slightly on the fowler before
releasing the tube.
3.3.2 Lowering the Fowler
Grasp the fowler frame tube with hand and grasp the ratchet release
handle with finger tips (Figure 3-9). Squeeze the ratchet release
handle and the fowler frame tube together while lifting slightly on the
fowler. Once the ratchet supports are disengaged, while lowering
fowler to desired position, continue squeezing ratchet release
handle (Figure 3-8B). Be sure the fowler is locked into place by
pushing down slightly on the fowler before releasing the tube.
Figure 3-7
A B
Figure 3-8
Figure 3-9
