2-1
Unpacking Instructions
Operator / Serivce Manual
069216
Important:
Report any shipping damage immediately! Inform shipper
of any damages – leave carton intact. Leave the Horizon Stretcher in
the receiving area until inspection is complete.
Your Hausted
®
Pediatric Care Stretcher has been carefully packaged
at our manufacturing plant to ensure safe shipment to you medical
facility. There are several procedures you must follow to put your new
Horizon Stretcher into service. These procedures only take a few
minutes to complete and are required to ensure proper operation of
the Horizon Stretcher.
Step 1
– Cut the two bands around the shipping carton.
Step 2
– Remove the top half of the carton and cut one side of the
bottom half.
Step 3
– Remove the Hausted
®
Pediatric Care Stretcher from the
carton. Cut the bands from around the stretcher.
Step 4
– Check to see if all features of the stretcher work properly. If
all features work properly, go to step 5. If any of the features
of the Hausted
®
Pediatric Care Stretcher do not work
properly, call STERIS for service.
Step 5
– Clean the Horizon Stretcher using a mild detergent to
remove any dirt accumulated during shipment.
Step 6
– Place the stretcher into service.
WARNING – LACERATION
HAZARD: When cutting bands
always use a tool specifically
designed for that purpose.
This will help to avoid
personal injuries frequently
incurred when bands are cut
and tension released.
!
UNPACKING INSTRUCTIONS
2
