E-Patch Mode___________________________________________________________________________________________13
7. E-Patch Mode
'E-Patch' is the short term for 'EEPROM Patch'. Here you can load or save another 26 programs in the
Programmer's memory, similar to an external RAM-card. You
even can give the programs names with 8 letters.
By pressing the E-Patch button you enter E-Patch Mode, in the
same way you are leaving it.
On entering E-Patch Mode you have to decide wheter to LOAD
a program and send it to the Pulse immediately.
Or if you want to SAVE the program currently in the
Programmer's memory.
If you press LOAD ...
… you can select a number between 0 and 25, the display
directly shows the program name.
If the current slot displays „Empty...“ there is no patch saved in
that slot yet. Logically you wont be offered a YES button.
By pressing YES the program will be read and sent to the Pulse
immediately. Pulse and Programmer are automatically in sync
then.
Note: as long as you did not save the Program on the Pulse it
resides just in the Pulses edit buffer.
With BACK you can leave the LOAD page at any time. You will
find yourself on the 1st page of E-Patch Mode then.
If you press SAVE …
... things look quite similar. But now you can give the program
to save a name before pressing YES to save the program into
the memory slot:
•
Encoder 2 selects the saving slot. Each time you
change the slot, it's original name is displayed shortly
to inform, what you are overwriting.
•
Encoder 3 to shift letter position
•
Encoder 4 to select the letter
There is a nifty aid for naming here! Play some notes while
being in this mode, you can select letters on your keyboard:
hard press = capital, soft keypress = small letters. You even can
shoft the position with the modulation wheel :-)
The same as in LOAD: use BACK to leave this page at any time
to get back to E-Patch's 1st page.
Synth Programmer for Waldorf Pulse – Operation manual V 1.0 – 01/2018
© Stereoping Germany, Meschede 2018
