Before using your new Steren´s product, please read this instruction manual to prevent
any damage.
I M P O R T A N T
The instructions of this manual are for reference about the product.
There may be differences due to updates.
Please check our website (www.steren.com) to obtain the latest version of the
instruction manual.
Product: Dual VHF microphone system
Part number: WR-202
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
01 800 500 9000
Product design and specifications are subject to change without notice.
C A U T I O N S
•
Do not use or store the equipment near wet places.
•
Clean only with a soft, dry cloth.
•
Do not bump or drop the microphone.
C O N T R O L S
Front panel
1. Power LED indicator.
2. Microphone on LED indicator channel 1.
3. Microphone on LED indicator channel 2.
4. Antenna 1.
5. Antenna 2.
Rear panel
1. DC IN.
2. Non-balanced mixer output.
B A T T E R Y I N S T A L L A T I O N
1. Turn the ring to your left as far as stop and push up the slide top.
H I G H L I G H T S
This dual VHF wireless microphone system is designed to better resist outside RF interferences
from other devices. The microphone includes a filter - which helps to reduce the wind or handling
noises, and battery status LED. The receiver has power and operation LEDs (RF/AF), with an
effective range up to 60 m.
•
High fidelity
•
Anti “pop” filter
•
Battery indicator
•
VHF (160-245 MHz)
•
Mixed output
2. Insert two new AA batteries. Make sure the batteries are inserted with the correct polarity and
replace the battery compartment cover and then turn the color ring on the right.
C O N N E C T I O N S
1. Connect the AC power adapter to the receiver’s DC IN connector and then plug the adapter into
a compatible AC electrical outlet.
2. Connect the receiver to a sound system, mixer or amplifier’s microphone input(s) with ¼” output
jacks.
H O W T O U S E
1. Switch the microphone’s power buttons to the ON positions.
2. Extend the receiver’s antennas and place them in a position where they can receive the signal
from the microphones.
3. Talk or sing into the microphones. During normal operation, the MIC ON signal LEDs will light on
when a microphone is being use, the AF LED will light on too.
If you want to mute the microphone, place the switch in the middle position. To resume,
place the switch at the top position.
Trouble
Solution
No sound; receiver RF light and
mic does not lit
- Check microphone battery to ensure it’s providing power.
- Replace the batteries if necessary.
- Check receiver’s AC power connection.
- Make sure antennas are in the microphone’s line of sight.
- If necessary, reduce the distance between the microphones and
the receiver.
No sound, but the RF lights are
glowing
- Check the proper connection between receiver and external
amplifier/mixer.
Received signal is noisy or contains
interference with transmitter on
- Check microphone batteries or replace if power is low.
- Remove local sources of RM interference, such as lighting
equipment.
Momentary loss of sound as
transmitter is moved around in
performing area
- Reposition the receiver, perform a “walkthrough” test and
observe the signal strength. If audio dropouts persist, mark
these “dead spots” in the performing areas and avoid them
during the performance.
S P E C I F I C A T I O N S
Input: 12-15 V 300 mA (receiver)
3 V 2 x AA (microphone)
AC power adapter
Input: 100 - 240 V~ 60 Hz 7 W max.
Output: 13.5 V 500 mA
4
5
POWER
RF1
RF2
1
2
3
1
2
DC --- IN
12 - 15 V
WIRELESS
AF OUT
OPEN
OPEN
DC --- IN
12 - 15 V
WIRELESS
AF OUT
AC 12V
R
L
R
L
R
L
1
2
GND
