Product: Dual cordless doorbell
Part number: TIM-320
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
01 800 500 9000
C A U T I O N S
I M P O R T A N T
•
Install the device in a dry place.
•
Clean with a soft, dry cloth.
•
Do not try to open the device, it may cause damages and void the warranty.
•
Do not expose to extreme temperatures.
The instructions of this manual are for reference about the product. There may
be differences due to updates.
Please check our web site (www.steren.com.mx) to obtain the latest version of
the instruction manual.
Before using your new Steren´s product, please read this instruction manual to prevent any
damage.
Product design and specifications are subject to change without notice.
H I G H L I G H T S
The cordless doorbell has 38 different ringtones, two transmitters and one bell, so you can control it
from two different places, such as main entrance and backdoor.
Easy installation, cables are not required. The bell uses two AA batteries, and it has switches to
select ringtone and volume.
The transmitters are push type and use a 12V battery. The operational range is 50m, up to 100m
in open areas.
•
38 tones
•
Easy installation
•
Cables are not required
•
Two transmitters
Package content:
•
Bell
•
Two transmitters
C O N T R O L S
Bell
1. Speaker
2. In-use indicator
3. Ringtone Up / Down
4. Volume
5. Battery compartment
Transmitter
1. Ring button
2. Battery compartment
B A T T E R Y I N S T A L L A T I O N
Bell
1. Remove the cover from the battery compartment located in the back part and place 2 AA type
batteries paying attention to polarity.
Transmitter
1. Remove the cover from the battery compartment using
a screwdriver.
2. Place one 23A type battery paying attention to polarity. Place the cover again.
I N S T A L L A T I O N
1. Hang the bell in the desired location.
2. Clean the surface where you want to place the transmitters.
3. Remove one of the protectors of the sticker and stick it on the desired surface. Press it slightly.
4. Once the sponge has been placed firmly on the surface, remove the second protector.
5. Place the door bell over the sponge and press slightly.
H O W T O U S E
1. To select one of the 38 ringtones, press up / down until you find the desired tone.
2. To adjust the volume level, slide the volume button.
It has three options: low, medium and high.
3. To start using the transmitters and the bell press the ring button, the indicator light will flash.
S P E C I F I C A T I O N S
Operational frequency: 315 MHz or 433.9 MHz
Operation temperature: -5 to 45°C
RH: >90% non condensed
Consumption: 3.2 Wh/day
Stand-by power consumption: 0.3 Wh/day
Bell
Input: 3 V (2xAA)
Transmitter
Input: 12 V (23 A)
