Steren RM-12, User Manual

Page: 6 / 19

You can program up to two button sequences (MACRO 1
and MACRO 2).
CALCULATOR
1.- Press REM / CAL button.
2.- Use the numerical buttons to performs math calculations.
3.- Buttons with special function in calculator mode:
ENT: Shows the result of a calculation (=)
P-CH: Adds a decimal point
: Multiplication
Volume -: Division
C: Sum
Channel -: Subtraction
Power: Clean the screen
4.- To leave Calculator Mode, press REM / CAL
SWITCH FROM ONE DEVICE TO OTHER
Just click the button of the desired device to use (TV, Sat, , Aux,
VCR, etc.).
RESTART
If you want to back to default parameters:
1.- Press and hold SET for 3 seconds, CODE SETUP will be
displayed in the screen.
2.- Chose RESET ALL option, using the multi-control button.
3.- The message CONFIRM, displays in the screen, if you want
to delete the parameters, press SELECT. If the process is com-
pleted, the message SUCCESS displays.
TROUBLESHOOTING
ENGLISH
ENGLISH-6
You can program up to two button sequences (MACRO 1
and MACRO 2).
Trouble Solution
Your brand is not listed in
the code section
Try the Automatic Search Method.
Try all the codes listed for your
brand. Try the Automatic Search
Method.
Make sure that the correct key was
pressed. For example. If you want to
control the TV set, make sure that
the TV key was pressed.
The remote control do not
operate your device (s)