Steren MUL-115, Instruction Manual

Page: 32 / 44

1. Connect the black test lead to the "COM" connector and the red test lead to the V Hz connector.
2. Set the selector to " " position by pressing "SELECT" to select Capacitance Measurement.
3. Connect the tips to the capacitor to be tested.
4. Read the result on the screen.
Caution:
A) Capacitors must be discharged before being tested.
B) When testing large capacitors, the response time will be longer
1. Connect the black test lead to the "COM" connector and the red
test lead to the "V Hz" connector.
2. Set the selector to "Hz".
3. Connect the test leads to the measurement point and read the
frequency on the display.
Capacitance measurement
Frequency measurement
Measurements 10
Ω
Ω
SELECT
DH>2 sec
OFF
CAP V
Hz
ºC
200A
1000A
400A/1000A
RANGE
REL Hz/Duty
- - -
- - -
- - -
Ω
SELECT
DH>2 sec
OFF
CAP V
Hz
ºC
200A
1000A
400A/1000A
RANGE REL Hz/Duty
- - -
- - -
- - -
Ω
Ω