7
Press SPLIT/RESET to scroll through the programmable digits
fields. The flashing digit is the digit that is ready to be edited. Use
the START/STOP button to edit the flashing digit. When setting
the hours, minutes, and seconds you can press START/STOP to
reset the selected digit to zero; press and hold it down to quickly
scroll.
The hour digits will scroll through A (for AM), P (for PM) and H (for
24 hour clock). Press MODE to return to normal operation.
1. Once ALARM SET mode is accessed the hour indicator and M
icon will flash.
2. Press STOP/START to change the hour. This step also
activates the alarm and displays the alarm indicator icon (bell in
upper right-hand corner of display ).
3. Press SPLIT/RESET to select minutes.
4. Press STOP/START to advance the minutes.
5. Press MODE to save alarm setting and to return to time display.
6. To enable the Alarm, follow the instructions in step 3 of the Normal Mode section. Note that
the Alarm time setting will reflect the AM, PM, or H mode programmed above in the SETTING
DATE AND TIME section.
H
M
3. SETTTING DATE AND TIME
4. ALARM SET
TIME SET
DATE SET
(To access, press MODE button 3 times from Normal Mode).
(To access, press MODE twice from the Normal Mode).