39
39
The Cruise function allows you to save a predetermined route. Enter to MENU > Setup >
PTZ > Cruise.
1. Select the cruise number to be programmed in the [cruise
path number] field.
3. In the [Dwell time] field set the total time that it will take the camera to move from one
point to another and the waiting period. Be sure to set enough time for to complete the route
and display.
4. Finally, in the bottom [cruise point] field enter the point which applies the changes and
confirm with [Add].
Repeat this process by following the same steps but select different preset and points,
confirm with [Add].
2. Select the point and its corresponding preset.
Schedule a trace route
5. To delete a point, enter it in the field below [dot] and click on [delete].
