Steren CCTV-960, Instruction Manual

Page: 61 / 111

66
IMPORTANT
Battery safety (remote control):
•Do not use old and new or different types of batteries at the same time.
•Remove the batteries when not using the remote control for a extended period.
•Keep the batteries out of the reach of children.
•If it comes in contact with a damaged battery material or leaking, take the following
measures:
-If the material gets into the eyes, do not rub. Clean thoroughly with clean water and seek
medical attention immediately with .
-If the material comes in contact with the skin or the clothes, immediately wipe the affected
area with clean water. Consult a doctor if you notice swelling or pain.
Operation safety of:
• Before turning on the system:
- Install the hard drive (more information in the page 23).
- Make all connections (more information in the page 15).
• After you turn on the system:
- Wait more than 1 minute short for the system to initiate.
- Start the administrator account in order to view the cameras.
- Formatting the hard disk; otherwise, you can not make recordings.
• To start the administrator account:
- When you turn on the DVR, you are prompted to log on. Select the “Admin” account. The
default password is “888888” (six eight numbers).
- Once connected the camera viewing screen appears. When you click with the right button
of the mouse or press MENU on the front panel / remote control opens the state bar of.
Press once again to open the tool bar, in which you can select the main menu (PROGRAM)
and other options.