Steren CCTV-940, User Manual

Page: 53 / 70

ENGLISH
ENGLISH-17
To select a time, use Up / Down buttons, then use SEL / EDIT to change
the parameter and finally press Menu to leave the menu and store the
changes.
For example:
If you set the next: -------TTTA---------
6 9
Mean that as of 6:00 hours of recorded continuously until 8:00 am and
9:00 am only record if motion is detected (if a device is connected to
move) then will not record anything.
g) Sub-menu:
Auto Record
Activate the function (ON) if you want to record automatically after
5 minutes without any operation. To turn the function off, select OFF.
Password
Allows you to activate or deactivate Password function; in case the
Password is on, you must type it to stop a record or to enter a menu.
Password Change
Press CH1 6 times and you will get the default password
(Current Password). Then, you must enter a new 6 digit code (New
Password), you can use any button of the remote control except Menu
button.