background image

V1.1

BIKE-300

0118m

 4 IN 1 BIKE LIGHT

Instruction manual

If you want to deactivate / activate the sound, pressonce  the             button 

Press the           button  to change to 

Radio FM 

mode.

CONTENT

PARTS

CHARGING BATTERY

ESPECIFICACIONES

Input: 5 V - - -  1 A
Output: 5 V - - - 1 A max.
Power output: 3 Wrms
Frequency response: 30 Hz-20 kHz
Sensitivity: 80 dB +/- 3 dB 
Bluetooth version: 4.0
Internal battery: 3.7 V - - - 4 000 mAh

Use the device as backup battery. Connect the mobile device as shown in the 

image:

Make sure that the lantern has enough charge to be able to use it as backup battery.

USB to Micro USB

power cable

Auxiliary

input

USB charging 

port

Power input

Micro SD

port

Lantern

LED indicator

Play/Pause

Speaker

Volume- / Previous 

Track / Sation 

/ Previous 

Track / Sation 

Turn on/ off lantern

Change mode

Microphone

To turn on or off the lantern press and hold the                 button

Press the button each time that you want to change the type of lighting. The 
sequence is the following:

• High intensity

• Low intensity

• Flash (medium speed)

• Flash (slow speed)

• Flash (fast speed)

PLAYBACK MUSIC

FM RADIO MODE

HANDS FREE*

To turn on the speaker, press the                    button      
To turn it off, press it again.

BLUETOOTH MODE

MICRO SD MODE  

1
2

Turn on the speaker.

1

Loosen the holder screw and 
remove it. Then insert the 
rubber into the holder.

2

Place the holder on the bike 
handlebar. Insert and tighten 
the screw until the holder is 
fixed.

3

4

Place the lantern in the clip 
holder by twisting it until it is 
fixed. Adjust the lock holder.

If it is necessary, press the           button to change to Bluetooth mode. 

The LED 

indicator  will flash in blue color

3

4

Start playing audio from your mobile device.

On your Bluetooth device, search and select Steren BIKE-300. If it is necessary, 
enter password 

0000

If the pairing is successful, you will hear a tone.

1

Turn on the speaker.

3

1
2

Turn on the speaker.

Insert a 

Micro SD

 (with MP3 files) 

into the corresponding slot. 

Playback will start automatically.

AUXILIARY

1
2

Turn on the speaker.

Insert a 3.5 mm auxiliary cable (not included)  in the speaker auxiliary input 
and into the playback music device. 

Press and hold as many 

times as necessary. (BT, FM 

Radio, Micro SD or Auxiliary)

Change mode

Play/Pause *

Next track*

Previous track *

 

Volume      

Next station

Previous station

 

Volume      

Press and 

hold

Press and 

hold

Answer call

* This function may vary depending on 

   the model of your mobile device

The smartphone and the speaker must be paired via bluetooth

*Only for Bluetooth and Micro SD mode

Redial the last 

number

Hang up call

Loosen  the lock holder and 
insert the lantern clip. Once 
you have inserted it, tighten 
the lock holder.

A

B

Turn on/off

speaker

4

Press and hold for a few seconds the             button for search and save in 
memory the radio stations.

5

Once the search is complete, use the speaker as follows:

Press 

X1

Press 

X1

Press 

X1

Press 

X1

Press 

X1

Press and 

hold

Press and 

hold

Press 

X1

Press 

X2

Press 

X1

The LED indicator 

will flash in red

In this mode, you can only control the 

volume from the speaker.

2

Connect the USB - micro USB cable into the USB port to use it as an antenna.

IMPORTANT

CAUTIONS

• Do not leave the lantern unattended while it is connected to the power source.
• Do not use the lantern if it has been dropped or damaged in any way.
• Repairs should be performed by qualified personnel.
• Do not exceed 8 m distance between the speaker and the Bluetooth device.
• This device is not intended for use by people (including children), whose 

physical, sensory or mental abilities are different or reduced, or lack experience 

or knowledge.
• Children should be supervised to ensure they do not use the device as a toy.
• Before first use, charge the battery to 100%.
•  Place  the  lantern  on  a  flat  surface,  free  from  vibration  and  away  from  heat 

sources.
• For safety, you must drive with caution and pay full attention to the 
surroundings during the bicycle ride. Avoid getting distracted by the lantern.
• Do not immerse in water or any other liquid.

The operation of this device is subject to the following two conditions: (1) it is possible that this  

device may not cause harmful interference and (2) this device must accept any interference, 

including interference that may cause undesired operation.

Read these manual to avoid any damage.

The instructions of these manual are for reference about the product.

There may be differences due to update.

Please check our web site 

www.steren.com

 to obtain the latest version of the 

instruction manual.

Rubber for holder

Lantern clip

Holder

Lantern

INSTALL IN BIKE

CHARGING  A MOBILE DEVICE

USING THE SPEAKER

USING LANTERN

Fully charge the battery for 4 hours before using it. 

During charging the LED 

indicator will flashing in red color

Disconnect the cable once the mobile device has finished charging. 

Charging times will 

depend on your Smartphone characteristics.

TURN ON / TURN OFF

WARRANTY

This Steren product is warranted under normal usage against defects in workmanship and  materials to the 

original purchaser for one year and three months  on the battery from the date of purchase.

CONDITIONS

1. This warranty card with all the required information, invoice, product box or package, and product, must be 

presented when warranty service is required.

2. If the product is in the warranty time, the company will repair it free of charge.

3. The repairing time will not exceed 30 natural days, from the day the claim was received.

4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any 

of the addresses mentioned later.

     

THIS WARRANTY IS VOID IN THE NEXT CASES:

If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow 

enclosed instructions, improper repair by unauthorized personnel, improper safe keeping, among others.

a) The consumer can also claim the warranty service in the purchase establishment.

b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.

RETAILER INFORMATION

Name of the retailer _______________________________
______________________________________________

Address ________________________________________
______________________________________________

Product ________________________________________
______________________________________________

Product: 4 in 1 bike light

Part number: BIKE-300

Brand: Steren

Centro de Atención a Clientes

01 800 500 9000

Summary of Contents for BIKE-300














Reviews: