Steren AMP-120, Instruction Manual, Page: 17 / 22

5
2
Connect audio cables * to the speaker or passive speakers *, in any of the configurations shown
in the following examples, and then connect them to the output terminals by impedance of the
amplifier.
In the amplifier, you must use the COM terminal (common) and the one corresponding to the
impedance of your array.
* Sold separately
Examples
2 serial speakers
16 Ω
8 Ω
8 Ω
1 speaker
8 Ω
4-16 Ω
2 parallel speakers
4 Ω
8 Ω
8 Ω
4 series / parallel speakers
8 Ω
8 Ω
8 Ω
8 Ω
8 Ω
16 Ω
8 Ω
8 Ω
OUTPUTS
SPEAKERS
DC 12 V
GND
AC125V
+ -