Product: Backup reverse parking sensor
Part number: ALA-055
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was received.
4.- Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please give a call to our Call Center.
01 800 500 9000
CONTROLS
CAUTIONS
HIGHLIGHTS
INSTALLATION
IMPORTANT
SPECIFICATIONS
OPERATION
DIAGRAM CONNECTION
• Do not expose your device to extreme temperatures.
• Always use a soft and dry cloth in order to clean.
• Do not attempt to open this device as this could cause malfunctions or the voiding
of the warranty.
• Do not use or store this equipment in places where there are leaks or splashing water.
• Please, install it with professional personnel.
Includes 4 integrated reverse parking sensors, central control module and bit to install
the sensors.
LED display which is installed the dashboard helping you to detect people or objets
behind the car.
Detection range comes from 0.4 to 2.5m
1. SWITCH ON/OFF: Turn on or off the display.
2. RIGHT INDICATOR: Lights when the sensor detects objects to the right.
3. DISTANCE INDICATOR: Displays distance between 0.4 to 2.5m
4. LEFT INDICATOR: Lights when the sensor detects objects to the left.
5. SPEAKER: Lets you hear an alarm tone if the sensor detects an object near the car.
6. L1: Connects left sensor number 1.
7. L2: Connects left sensor number 2.
8. R2: Connects right sensor number 2.
9. R1: Connects right sensor number 1.
10. DISPLAY INPUT: Connect the Display.
11. INPUT power wire (Red-Black, included).
12. Hole mount.
13. Sensor.
The instructions of this manual are for reference about the product.
There may be differences due to updates.
Please check our web site (www.steren.com) to obtain the latest
version of the instruction manual.
Input: 10.5-16V - - - 200mA
Operating temperature: -30ºC a 70ºC
Nominal consumption: 6.76 kWh/year
Stand-by power consumption: 3.63 kWh/year
Before using your new Steren´s product, please read this instruction manual
to prevent any damage.
1.- If the distance between the floor and the bumper is from 50 to
65cm, we recommend installing the sensors around 55cm from
the floor.
50 - 65 cm
2.- Mark the places where you need
to install the sensors.
3.- Drill the fascia.
4.- Insert the wire and then the sensors into the
holes.
5.- Install the control box inside of the car’s trunk.
6.- Place the display in the dashboard.
7.- Connect the power cable to the reverse light cord.
8.- Connect the cables of the sensors in the inputs on the control box. Then
connect the cable from the Display in the corresponding input into the control box.
9.- Insert the power cord in the corresponding input into the control box.
m
R
L
When put into reverse the car, you can see the distance between the car and the
object in the screen.
In addition, the sensor detects whether the object is on the right or left.
When the distance is too short between the object and the car, you may hear a tone.
For more information see the following table.
DISTANCE ALARM SOUND
DISPLAY
COLOR
2,5~1,6m
Silence
2,5~1,6m
Green
1,5~1,1m
3 Tone
1,5~1,1m
Green
1,0~0,5m
4 Tone
1,0~0,5m
Green and Yellow
≤4,0m
Continuous tone
0,4m 0,0m
Green, Yellow and Red
Product design and specifications are subject to change without previous notice.
