Instruction manual
Magnetic switch for
alarms
V2.2
ALA-005
1019n
Before using the product, read the following instructions to avoid any malfunction.
CAUTIONS
SPECIFICATIONS
INSTRUCTIONS
• This device is not intended for use by people (including children), whose physical, sensory or
mental abilities are different or reduced, or who lack experience or knowledge.
• Children should be supervised to ensure they do not use the device as a toy.
• Do not expose the product to extreme temperatures.
• Do not use or store it in places where there are leaks or splashes of water. It can cause a
malfunction
Magnetic switches can be used in doors or
windows.
1. Route the alarm system wiring to where
you will install the switch.
2. Remove the cover.
3. Place the two pieces of the switch on the
surface of the door or window where you
want to install it, and make the drilling
marks. Make sure that the distance
between both pieces does not exceed 2 cm
and that they are aligned, as shown in the
image.
4. Secure the parts with screws (not
included).
5. Place the cables of the alarm system in
the terminals and tighten the screws.
6. Replace the cover.
When the door or window is opened, the
alarm system will start up.
Maximum operating distance: 25 mm
Operating voltage: <24 V
Breakdown voltage: 250 V max.
Current: 100 mA
Operation time: 0.6 milliseconds
Release time: 0.1 milliseconds
Product design and specifications may vary without prior notice.
ELECTRÓNICA STEREN S.A. DE C.V.
Biólogo Maximino Martínez, núm. 3408, col. San Salvador Xochimanca, Azcapotzalco,
Ciudad de México, C.P. 02870, RFC: EST850628-K51
STEREN PRODUCTO EMPACADO S.A. DE C.V.
Autopista México-Querétaro, Km 26.5, sin número, Nave Industrial 3-A, col. Lomas de
Boulevares, Tlalnepantla de Baz, Estado de México, C.P. 54020, RFC: SPE-941215-H43
In case your product fails, or you have questions about your product, please contact your
nearest dealer.
If you are in Mexico, please call our Call Center at (55) 15 16 60 00
IMPORTED BY
