Steren AIR-250, Instruction Manual

Page: 18 / 22

77
7. After removing the water tank, remove the packing that is in the drain hole to drain the
water.
8. Wash out the water tank, wipe with a cloth and place the packing into the hole.
9. To clean the device surface, turn it off and unplug it. Only use a cloth or a soft brush to
clean dust from the intake grilles and air output.
The dehumidifier
it doesn´t work.
* Make sure the power cable is properly connected to the power adapter and
to the outlet.
* Verify that the LED adapter remains on.
* Turn on the device.
* Check that the water tank is correctly positioned so that the internal switch
is activated.
* Empty the water tank when is full.
* Remove any objects that are blocking the air input.
* Check for open doors or windows, since a large amount of air flow prevents
the device works properly.
* Observe the surface on which you placed the dehumidifier, if it is irregular,
change it to a flat place to avoid inclinations or fall hazards.
The dehumidifier
collects few quantity
of water.
Water drips from the
front of the unit.
TROUBLESHOOTING
TROUBLE
SOLUTIONS