SteppIR DB18E Yagi, Assembly Manual, Page: 10 / 80

Tech Support: www.steppir.com/support
⚫
Tel: 425.453.1910
⚫
support@steppir.com
Page 10
ASSEMBLY KITS
(a bill of materials for each kit is shown on the next page)
✓
QTY Part # Description
3 72 - 0030 - 61 40/30 loop hardware kit
1 72 - 0035 - 02 Boom assembly kit
1 72 - 0036 - 02 Director element hardware kit
1 72 - 0037 - 02 Reflector element hardware kit
1 72 - 0039 - 01 Driven element hardware kit
1 72 - 0041 - 11 Glue, tape and anti - seize kit (use anti - seize on ALL stainless fasteners!)
1 72 - 0040 - 01 Mast plate hardware kit
1 72 - 0042 - 01 Coax antenna switch hardware kit
1 72 - 0042 - 11 Coax antenna switch cable kit (comes in a tie - wrapped bundle)
ANTENNA OPTIONS
6m Passive Element OPTION
1 70 - 1001 - 91 6m Passive element
1 72 - 1001 - 71 Hardware kit for 6m option
Voltage suppressor (lighting arrestor) OPTION
1 20 - 8052 - 51 16 pin voltage suppressor
40/30 Loop Element Truss Kit OPTION
1 10 - 1618 - 11 40/30 truss support arm (Driven element)
2 10 - 1054 - 02 40/30 truss support arm (Director, Reflector elements)
2 72 - 0018 - 31 Loop element truss kit (Director, Reflector elements)
ONE of the following kits:
1* 72 - 0018 - 51 *Loop element truss kit (Driven element—no optional boom truss kit)
1* 72 - 0018 - 61 *Loop element truss kit (Driven element—Optional boom truss purchased)
1 72 - 0043 - 01 Boom truss kit
1 10 - 1618 - 11 Boom support mast
DB18E PARTS CHECKLIST (continued)
PREAMBLE
*If you did not purchase the optional boom truss, the Driven element loop truss kit included is the 72 - 0018 - 51