®
6 Operation
©
F. Stephan GmbH
GA-602-0106V1.0-PAE-GB
25
6 Operation
6.1 Switching
on
Only switch the device on if it is not pressurized!
1. Switch on the mains switch "On/Off" for O
2
and AIR on the front of
the device.
2.
S
TAXEL
3.5
starts to generate oxygen and compressed air
3. The pressure in the corresponding pressure gauges for oxygen and
compressed air on the front panel increases to 3.5 bar.
4. Switch on the mains switch "On/Off" for VAC on the front of the
device.
5.
S
TAXEL
3.5
starts to generate vacuum.
6.2 Switching
off
1. Switch off the mains switch "On/Off" for O
2
and AIR on the front of
the device.
2. Pressure is released from the tanks.
3. Switch off the mains switch "On/Off" for VAC on the front of the
device.
6.3
Stopping the device
1. Switch off the mains switch "On/Off" for O
2
and AIR on the front of
the device.
2. Pressure is released from the tanks.
3. Switch off the mains switch "On/Off" for VAC on the front of the
device.
4. Remove all tubes from the connections.
5. Disconnect the device from the mains.
