7-
10
Cha
p
ter 7
Parameter descri
p
tio
n
Shanghai Sigriner STEP Electric Co., Ltd.
7: communication set current speed
8: function set target speed
9: backup
10 : backup
A0, A1 (A1 terminal, jumper J1 set as 2, 3), input specification: 0
~
10V or -10
~
10V,
Corresponding relation between analog quantity and set frequency is determined
by Group P32
11: DI set target speed
12: communication set target speed
13: CAN set current speed
Under torque control mode, its set depends on the following channels
0: panel set
Panel digital torque set
1: A0 analog quantity set
2: A1 analog quantity set
When torque set mode is set as analog quantity input, match it correctly while
setting up the definition of function parameter of analog port, such as when P10.04
is set as 1, P32.01 must be 2; also, when P10.04 is set as 1, P32.07 must be 3
3: communication set torque
Set the target torque through communication port; for communication mode, see
Group P80
4: function set target torque
For some specific industry, set the torque by design of different functions
accordingly
Compensation torque selection modes are:
P10.04
Torque set mode
0
~
5 (0)
P10.05
Compensation torque set mode
0
~
5 (0)