Stentorfield Viision 2000 Range, Programming Manual

Page: 22 / 36

1. Upon entry into the initialise sub-program, the display will show the message:
2. To initialise the machine, press access.The display will now show:
3. The LCD will flash this message accompanied by an intermittent beep.To return
to the Engineers program or standby mode, it is necessary to press the cancel
key. This ensures that should the initialise sub-program ever be inadvertently
activated, the engineer cannot overlook the fact that the machine has been
initialised.
7. Cup Level Sub-Program
1. The cup level sub-program allows the amount of water used in each cup vend to
be altered on a percentage basis. This enables different size cups to be used
without having to change each drink ingredient quantity. Jug vends remain
unaffected.
2. The sub-program will display the percentage cup level which may be altered in
the same way as all other parameters. 100% cup level will dispense the exact
amount of water set in the drink ingredient sub-programs. A figure below 100%
will dispense less water, and a figure above 100% will dispense more.
8. Management Sub-Program
The management sub-program informs the controller which hardware aspects of the
machine have been selected. For Vision machines this relates to the coin system fitted.
Access into the “Coin System” program displays the type of coin system selected. To
change the selection, press the access key followed by the ‘up’ or ‘down’ keys to display
the required selection. Enter the new selection by pressing the access key. If the
machine is not fitted with a coin system, the option “Free Vend Only” should be
selected.
9. Key Configuration Sub-Program
The key configuration sub-program enables the positions of the drinks on the keypad
to be re-configured.
1. Upon entry into the sub-program, the display will show the first button followed
Programming Manual
20
USE ACCESS KEY
FOR INITIALISATION
INITIALISED