background image

The information in this document pertains to the Turbine 
Compact IP Stations TCIS-1/TCIS-1-V, TCIS-2,  TCIS-3, 
TCIS-4, TCIS-5, TCIS-6, TKIS-1.

Turbine TCIS-1/TCIS-1-V Station Keys & Functions

Turbine TCIS-6 Station Keys & Functions

Loudspeaker

Cancel

Microphone

Manual Speech

Direction Control

Call Button

Loudspeaker

Cancel

Microphone

Call Button

Scroll Up

Scroll Down

PMOLED

Display

1  Station Connections

1.1  External Connectors

The following table is an overview of the main connectors 
involved when installing the Turbine IP Stations.

Ethernet/Power

10/100 Mbps Ethernet RJ-45 port for LAN (uplink) 
connection. Supports PoE (802.3af). Draws power from 
either spare line or signal line.

Secondary 
Power

24 VDC (16 – 48 V) secondary power is provided from an 
external adapter. 

Relays

There is one Double Throw relay contact with 60W 
switching power. COM, NO, NC contacts are provided. Max: 
250VAC/220VDC, 2A, 60W.

Input/Output

6 general purpose I/Os are available. Each I/O can be 

configured as either button input or LED driver. 

Audio Line Out

A balanced 600 ohm audio line out with induction loop signal

1.2  Power Supply

The Turbine Station supports Power over Ethernet (PoE, 
IEEE 802.3 a-f) where power can be drawn from either the 
spare line or signal line. 

If PoE is not available, the Turbine Station can be connected 
to a 24 VDC local power supply.

1.3  Network Connection

There is one RJ-45 port located on 
the Turbine station that is used as the 
PoE/LAN port.

PoE port

1.4  Input/Output Connections

There are 6 I/O connection options for the Turbine Station. 
These connections are used as relay contacts for door lock 
control and external I/O devices.

1

5

4

3

2

1

6

10

5

4

3

2

9

8

7

RJ-45

PoE

port

24 VDC for external secondary power 
if PoE is not used. Pin 1 is positive.

- 5.3V (LED driver)

- GND

- Input/Output 5

- COM relay

- NC relay

- NO relay

- Input/Output 1

- Input/Output 2

- Input/Output 3

- Input/Output 6

- 600 ohm balanced line out +

- 600 ohm balanced line out -

- Input/Output 4

E

th

er

ne

t C

on

ne

ct

io

Turbine Compact IP Stations

Getting Started for SIP

Summary of Contents for Turbine TCIS-1

Page 1: ...general purpose I Os are available Each I O can be configured as either button input or LED driver Audio Line Out A balanced 600 ohm audio line out with induction loop signal 1 2 Power Supply The Turbine Station supports Power over Ethernet PoE IEEE 802 3 a f where power can be drawn from either the spare line or signal line If PoE is not available the Turbine Station can be connected to a 24 VDC ...

Page 2: ...ion mode and IP parameters IP Network SIP phone iPBX SIP domain SIP phone Turbine TCIS 1 Turbine TICS 5 Turbine TICS 6 Station Mode Select the Use SIP radio button Turbine Frontboard Depending on the type of Turbine Compact station select one of the options from the drop down box Kit Normal TCIS 1 TCIS 2 TCIS 3 OLED Labels TCIS 4 TCIS 5 Scrolling Station TCIS 6 IP Settings DHCP Select this option ...

Page 3: ...hout the enter key having to be pressed DTMF method Choose between SIP INFO or RFC 2833 to select DTMF signalling method RTP Timeout value This cancels a call if the station does not receive RTP packets from the remote party Enter values in the range 0 9999 seconds The default setting is 0 which means RTP timeout is disabled After entering all the desired values click Save and then click Reboot to...

Page 4: ...lay is active Talk Icon Flashing at 1 second intervals Station has no connection to the AlphaCom server exchange Possible reasons No connection to Ethernet Wrong AlphaCom XE IP address configured Invalid IP address No gateway or wrong gateway to the AlphaCom server exchange Talk Icon Flashing at 5 second intervals Station connected but NOT registered in the AlphaCom server exchange Reason Station ...

Reviews: